Table of Contents
Advertisement
EX2300-C and EX2300 Switches Hardware Guide
Related
Documentation
202
unplugging is then absorbed by the short fiber extension, which is easier and less
expensive to replace than the instruments.
Keep fiber-optic cable connections clean. Microdeposits of oil and dust in the canal of
the transceiver or cable connector can cause loss of light, reduction in signal power,
and possibly intermittent problems with the optical connection.
To clean the transceiver canal, use an appropriate fiber-cleaning device such as
RIFOCS Fiber Optic Adaptor Cleaning Wands (part number 946). Follow the directions
in the cleaning kit you use.
After cleaning the transceiver, make sure that the connector tip of the fiber-optic
cable is clean. Use only an approved alcohol-free fiber-optic cable cleaning kit such
as the Opptex Cletop-S
use.
Connecting a Fiber-Optic Cable on page 170
Laser and LED Safety Guidelines and Warnings on page 241
®
Fiber Cleaner. Follow the directions in the cleaning kit you
Copyright © 2017, Juniper Networks, Inc.
Hide quick links:
Advertisement
Table of Contents
