Juniper EX2300-C Hardware Manual page 202

EX2300-C and EX2300 Switches Hardware Guide
180
Data—8
Parity—None
Stop bits—1
DCD state—Disregard
To connect and configure the switch from the console by using the CLI:
Connect the console port to a laptop or PC by using the RJ-45 to DB-9 serial port
1.
adapter. An Ethernet cable that has an RJ-45 connecter at either end and an RJ-45
to DB-9 serial port adapter are supplied with the switch.
For the location of the console port on different EX Series switches:
See EX2200 Switches Hardware Overview.
See "EX2300 Switches Hardware Overview" on page
See Rear Panel of an EX3200 Switch.
See Rear Panel of an EX3300 Switch.
See Rear Panel of an EX3400 Switch.
See Rear Panel of an EX4200 Switch.
See EX4300 Switches Hardware Overview
See Front Panel of an EX4500 Switch.
See EX4550 Switches Hardware Overview
See Switch Fabric and Routing Engine (SRE) Module in an EX6200 Switch.
See Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch.
See Routing Engine (RE) Module in an EX8216 Switch.
NOTE: In EX2200-C, EX2300-C, EX2300, EX4300, and EX4550 switches,
you can also use the Mini-USB Type-B console port to connect to a laptop
or PC.
For EX2200-C switches, see Connecting an EX2200 Switch to a
Management Console Using Mini-USB Type-B Console Port.
For EX2300-C and EX2300 switches, see
to a Management Console by Using Mini-USB Type-B Console Port" on
page 169.
For EX4300 switches, see Connecting an EX4300 Switch to a
Management Console Using the Mini-USB Type-B Console Port.
For EX4550 switches, see Connecting an EX4550 Switch to a
Management Console Using the Mini-USB Type-B Console Port.
At the Junos OS shell prompt
2.
3.
"Connecting an EX2300 Switch
root% , type ezsetup.
Copyright © 2017, Juniper Networks, Inc.