Pepperl+Fuchs OHV-F230-B17 Manual page 11

OHV-F230-B17
Operation and Communication
Downloading the GSD File
You can find the relevant GSD file in the Software section of the product detail page for the
device.
To access the product detail page for the device, go to http://www.pepperl-fuchs.com and type
information about the device (e.g., the product description or the item number) into the search
function.
Inserting the function block and data module
1. Unzip the zip file.
2. In the module folder, mark the OHV-F230-B17 function block and the associated iDB_OHV-
F230-B17 instance data block. Right-click on the marked entries and select Copy.
3. Right-click the destination project and select Insert.
Connecting the gateway to the S7 control panel
1. Before installing a GSD file, close all hardware configuration projects.
2. To install the GSD file, select Options > Install GSD files in the hardware configuration.
3. Connect the gateway to the PROFINET network.
4. To integrate the gateway into your PROFINET, double-click the PN-IO unit in the rack.
Figure 4.2
This opens the Properties window.
5. Click Properties.
6. To create a new Ethernet subnet, click New.
7. To insert the Ethernet subnet into the hardware configuration, right-click the PN-IO unit and
select Insert PROFINET IO system.
Assigned rack
11