Table of Contents
Advertisement
4.3" Designer Touch Screen
14 • 4.3" Designer Touch Screen: TPMC-4SMD-FD
To add an IP entry to a blank slot, first touch Add IP. The Edit Control System
Settings screen is displayed, as shown in the illustration below.
"Edit Control System Settings" Screen
Touch the IP Address / Hostname field. The on-screen keyboard opens, as shown in
the illustration below.
On-Screen Keyboard
Touch CLEAR to remove any previous entry. Then enter the address required.
Touch OK to accept the entry or CANCEL to cancel the entry, which hides the on-
screen keyboard and returns the display to the Edit Control System Settings screen.
On the Edit Control System Settings screen, touch Save to keep the change or
Cancel to cancel the change and to return to the Control System Interface menu.
To edit the port, CIP ID, or Device ID, touch the appropriate button. Touching the
Port (41794) button opens the numeric keypad. Touching the CIP ID or Device ID
buttons opens a hex keypad, shown in the illustration on the next page.
Crestron TPMC-4SMD-FD
Installation & Operations Guide – DOC. 7174F
Advertisement
Table of Contents
