Table of Contents
Advertisement
Crestron TPMC-4SMD-FD
Installation & Operations Guide – DOC. 7174F
Hex Keypad
Touch CLEAR to remove any previous entry, and then enter the ID required. Touch
OK to accept the entry or CANCEL to cancel the entry, which hides the hex keypad
and returns the display to the Edit Control System Settings screen.
On the Edit Control System Settings screen, touch Save to keep the changes or
Cancel to cancel the changes and to return to the Control System Interface menu.
From the Control System Interface menu, to edit or remove an IP entry, first touch
the appropriate button containing the entry. Next, touch Edit IP or Remove IP as
appropriate. Editing an entry displays the Edit Control System Settings screen
(refer to the middle illustration on page 14). Removing an entry displays a message
saying "Please Confirm IP Table Entry Removal By Pressing the OK Button," as
shown in the illustration below.
Confirm IP Table Entry Removal Screen
Touch OK to confirm the removal or touch CANCEL to cancel the removal. The
display returns to the Control System Interface menu (refer to the illustration at the
bottom of page 13). From the Control System Interface menu, touch Back to return
to the Ethernet Setup menu.
4.3" Designer Touch Screen
4.3" Designer Touch Screen: TPMC-4SMD-FD • 15
Advertisement
Table of Contents
