Introduction; Specifications - Jet EHB-916V Operating Instructions And Parts Manual

Familiarize yourself with the following safety notices used in this manual:
!
This means that if precautions are not heeded, it
may result in minor injury and/or possible machine
damage.

4.0 INTRODUCTION

This manual is provided by JET
and EHB-1018V. This manual contains instructions on installation, safety precautions, general operating procedures,
maintenance instructions and parts breakdown. Your machine has been designed and constructed to provide years of
trouble-free operation if used in accordance with the instructions as set forth in this document.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our web site: www.
jettools.com. Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.

5.0 SPECIFICATIONS

Model Number
Stock Number
Capacity (in.):
Round at 90°
Round at 45°
Rectangle at 90°
Rectangle at 45°
Vise Swivel
Blade Size (in.)
Blade Wheel Diameter (in.)
Blade Wheel Speed (SFPM)
Motor
Bed Height (in.)
Overall Dimensions (in.)
Net Weight - approx. (lbs.)
Shipping Weight - approx. (lbs.)
The specifi cations in this manual were current at time of publication, but because of our
policy of continuous improvement, JET, reserves the right to change specifi cations at any
time and without prior notice, without incurring obligations.
6
®
covering the safe operation and maintenance procedures for a JET Model EHB-916V
EHB-916V
891050
9
7
6 x 16
7 x 8 1/2
45°
1 x 0.035 x 128
14
50 - 275 Variable
1.5 HP, 115/230V, 1PH,
60 Hz, pre-wired 115V
27
72 x 30 x 42
616
726
!
This means that if precautions are not heeded, it
may result in serious or even fatal injury.
EHB-1018V
891060
10
9
5 x 18
8 1/2 x 9
45°
1 x 0.032 x 132 1/2
14
50 - 275 Variable
2 HP, 230V, 1PH, 60Hz
27
70 x 30 x 44
704
814
Horizontal Band Saw