Introduction; Specifications - Jet XACTA JTAS-10DX Operating Instructions And Parts Manual

Introduction

The JET XACTA ® Saw Deluxe table saw you have purchased is a high quality machine tool that will give
you years of superior service. You will get maximum performance and enjoyment from your new table
saw if you will take a few moments now to review the entire manual before beginning assembly and
operation.
This table saw, as well as all JET products, are backed by a nationwide network of authorized distributors
and/or service centers. Please contact your nearest distributor should you require parts or service. Parts
are also available directly from JET by calling 1-800-274-6848.
Now that you have purchased a table saw, it is a good time to consider a dust collection system. See your
local JET distributor for the complete line of dust collectors and the full line of JET Dust Collector Hoses
and Accessories. Customize your installation and obtain maximum performance with JET's dust hoods,
hoses, clamps, fittings, and blast gates.
Assembling and fine tuning a table saw, fence and rail system, extension tables, etc. can be a time
consuming project. It is best not to rush. The table saw does not come with a plug. Purchase a plug that
matches the 230V or 460V outlet that will be used. The table saw does not come with a blade so you may
want to purchase a variety of blades for different applications.

Specifications

Stock Numbers ............................................................................................................... 708674 (3 HP, 1 Ph)
............................................................................................................................. 708676 (5 HP, 1 Ph)
............................................................................................................................. 708680 (5 HP, 3 Ph)
Blade Diameter .......................................................................................................................................... 10"
Arbor Diameter .......................................................................................................................................... 5/8"
Maximum Depth of Cut ................................................................................................................................ 3"
Maximum Thickness at 45 Cut ............................................................................................................. 2-1/8"
Table in Front of Saw Blade at Maximum Cut ........................................................................................... 10"
Maximum Width of Dado ....................................................................................................................... 13/16"
Maximum Diameter of Dado ........................................................................................................................ 8"
Dust Port Diameter ....................................................................................................................................... 4"
Dust Collection Minimum CFM required ................................................................................................... 350
Table Height ............................................................................................................................................... 34"
Table Size (with extension) ......................................................................................................... 29"D x 42"W
Table Size (without extension) .................................................................................................... 29"D x 20"W
Arbor Speed ................................................................................................................................... 4300 RPM
Sound Rating:
(without blade) ...................................................................................................................... 70 dB at 3 ft.
(with 10"x50T blade) ............................................................................................................ 85 dB at 3 ft.
Motor
SN 708674 .......................................................................................................... 3HP, 1Ph, 230V only
SN 708676 ......................................................................................................... 5 HP, 1Ph, 230V only
SN 708680 .................................................... 5HP, 3Ph, 230/460V, prewired 230V (see Note below)
Weight
Net ............................................................................................................................................ 330 lbs.
Gross ........................................................................................................................................ 407 lbs.
Note: For 460V operation, magnetic switch (Part No. JTAS10-23B) must be purchased separately and
installed. A qualified electrician is recommended.
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, JET reserves the right to change specifications at any time and without prior
notice, without incurring obligations.
6