Mounting The Switch On A Wall - Cisco Catalyst 3550 Installation Manual

Chapter 2 Installing and Starting the Switch

Mounting the Switch on a Wall

Warning
Figure 2-20 Mounting the Switch on a Wall
User-supplied
screws
78-11358-03
For the best support of the switch and cables, make sure the switch is attached
securely to wall studs or to a firmly attached plywood mounting backboard.
Mount the switch with the front panel facing up, as shown in
To comply with safety regulations, mount the switches on a wall with the front
panel facing up.
Catalyst 3550 Multilayer Switch Hardware Installation Guide
Installing the Switch
Figure
User-supplied
screws
2-20.
2-21