Gigastack Gbic Module Ports; Console Port - Cisco Catalyst 3550 Installation Manual

Connector Specifications

GigaStack GBIC Module Ports

Caution

Console Port

Catalyst 3550 Multilayer Switch Hardware Installation Guide
B-6
Figure B-5 1000BASE-T Connector
Pin Label
1 TP0+
2 TP0-
3 TP1+
4 TP2+
5 TP2-
6 TP1-
7 TP3+
8 TP3-
The GigaStack GBIC module ports use proprietary connectors, as shown in
Figure B-6. The GigaStack GBIC cables are proprietary, high-data-rate cables
with enhanced signal integrity and EMI protection.
Do not use standard IEEE 1394 cables with the GigaStack GBIC.
Figure B-6 GigaStack Connector
The console port uses an 8-pin RJ-45 connector, described in
Table B-3. The supplied RJ-45-to-DB-9 adapter cable is used to connect the
console port of the switch to a console PC. You need to provide a RJ-45-to-DB-25
female DTE adapter if you want to connect the switch console port to a terminal.
Appendix B Connector and Cable Specifications
1 2 3 4 5 6 7 8
Table B-2 and
78-11358-03