Mounting The Switch To A Wall - Cisco Catalyst 2950 Hardware Installation Manual

Chapter 3 Installation

Mounting the Switch to a Wall

Warning
Figure 3-20 Mounting a Catalyst 2950 Switch to a Wall
User-supplied
screws
wall mounting configuration
78-11157-05
To comply with safety regulations, mount switches on a wall with the front
panel facing up.
For the best support of the switch and cables, make sure the switch is attached
securely to a wall stud or to a firmly attached plywood mounting backboard, as
shown in Figure 3-20.
Vertical
wall stud
Face up
After the switch is mounted on the wall, power the switch as described in
Chapter 1, "Quick Installation."
Catalyst 2950 Desktop Switch Hardware Installation Guide
Installing the Switch on a Wall
Vertical
wall stud
3-25