10
5.2 Windows – Mytek Control Panel installation process
1. Locate the MytekControl.zip file and extract
the content by right clicking on the zip archive
icon and selecting "Extract Here".
2. To install The Mytek Control double click the
extracted Windows Installer Package file. When
MytekControl Setup Wizard appears click „Next"
then accept license and click „Next" again.
3. All options should be choosen in „Custom Setup"
menu. To confirm the installation of each option
select „Will be installed on local hard drive" then
click „Next" and „Install" to begin the installation.
Mytek Manhattan II DAC
4. To complete the installation of the driver simply
click the „Finish" button.
5. Confirm the installation by launching the Mytek
Control application. Installation was successful if
the MytekControl application shows the Manhattan
II DAC with serial number and permits access to
all options.
User's Manual
5.3 Windows – setting the Brooklyn ADC as default system
playback device.
1. To set the Manhattan II DAC as your default
Windows playback device find the speaker icon
(Sound Settings) in the notification area (lower
right corner of your screen) and right-click. Choose
„Playback devices" from the context menu.
Note! – pro audio (DAW) applications (Cubase, Samplitude,
Reaper etc.) or proffesional media players (Jriver etc.) use ASIO
drivers and need to be configured a different way. Please check
our
„Software Setup
mytekdigital.com
6. Manhattan II DAC OSX installation
6.1 OSX – USB 2.0 driver installation
The Manhattan II DAC custom designed USB2 controller supports driverless operation on MAC. It
means that no extra drivers are required. Driverless operation basically means „plug and play".
The Manhattan II DAC will automatically show up in your computer's list of supported audio devices
as „Manhattan II DAC". Simply choose that as your default audio playback device and the system will
work.
6.2 OSX – Mytek Control Panel installation.
To install the Mytek Control Panel
simply
drag
and
drop
Mytek
application file (located in Mytek_
ControlPanel_v.1.xx.dmg
file)
to
„Applications" system folder. Follow
the link to download the latest
version of the Mytek Control Panel
application.
2. Right-click „Speakers Manhattan II DAC" and
choose „Set as Default Device".
Guide" shown on our web site:
11
Need help?
Do you have a question about the Manhattan II and is the answer not in the manual?