Recommendations And Care - Baume And Mercier Clifton 65717 Instruction Manual

Hide thumbs Also See for Clifton 65717:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
CHRONOGRAPH: SIMPLE FUNCTION
30
P1: Start/stop push-button. Press once to start the chronograph
(F=seconds, G=minutes, J=1/10 second). Press a second
time to stop.
P2: Reset push-button.
To measure several successive times, without counting intervals,
press the P1 push-button several times consecutively, as follows:
1. Start.
2. Stop and read.
3. Start.
4. Stop and read.
This operation may be repeated as often as desired to measure
successive times.
5. Press the P2 push-button to reset the chronograph to zero.
CHRONOGRAPH: ADDITIONAL FUNCTION
"SPLIT-SECONDS"
30
To measure intermediate time periods with a split-seconds hand.
1. Press the P1 push-button to start the chronograph.
2. Press the P2 push-button to read the intermediate time.
3. Press the P2 push-button to reset and read the time elapsed.
16 |
Operations 2 and 3 may be repeated as often as desired to
measure any number of intermediate times.
4. Press the P1 push-button to stop the chronograph and read
the final time.
5. Press the P2 push-button to reset the chronograph to zero.
CHRONOGRAPH: INITIALIZING
THE COUNTERS
30
If the counters are not correctly reset to zero, kindly proceed in
the following order:
1. Pull the crown out to Position 2.
2. Press push-button P2 to reset the minutes counter (G) to
zero.
3. Pull the crown out to Position 3.
4. Press push-button P1 to reset the chronograph seconds
counter (F) to zero.
5. Press push-button P2 to reset the tenth of a second counter
(J) to zero.
6. Press the crown back into Position 1.
IV. RECOMMENDATIONS AND CARE
Your Baume & Mercier watch was both designed and
manufactured with great care. It contains a great number
of very delicate components, which is why we encourage
you to be careful, avoid any impact to the watch, avoid
any erroneous adjustments, and protect it from impact and
extreme temperature variations.
Furthermore, a watch is something rare in that it works
continuously, 24 hours a day. For optimal reliability and
for the longevity of your watch, we recommend having your
watch serviced every 3 to 5 years.
BAUME & MERCIER AUTHORIZED AFTER-
SALES SERVICE CENTERS
Baume & Mercier watches are maintained by an international
network of After-Sales Service Centers which meet the
highest quality requirements of Swiss watchmaking.
Approved through a demanding selection process, only a
Baume & Mercier authorized retailer or After-Sales Service
Center is authorized to perform service on your watch.
These centers undergo regular training provided by the
brand, thus guaranteeing an irreproachable service quality
by using specially-designed tools meant for repairing
Baume & Mercier watches and by replacing worn parts with
original components. Furthermore, tests are conducted using
up-to-date and reliable quality controls.
Any repair work not carried out by a Baume & Mercier
authorized retailer or After-Sales Service Center will not be
covered by the Baume & Mercier warranty. Also excluded
from warranty coverage are watches not containing original
Baume & Mercier parts.
Furthermore, to safeguard your watch, please read the
following recommendations for use and care:
MECHANICAL WATCH MAINTENANCE
In the event that your watch will not be worn for several
months, we recommend you wind your mechanical watch
regularly so that the oils do not seize, thus disrupting proper
functioning of the movement.
WATER-RESISTANCE
Baume & Mercier watches are water-resistant up to at least
30 meters. If a model's water-resistance goes beyond 30
meters, the depth is indicated on the back of the case.
When a watch is water-resistant its movement is protected
from dust, humidity and any risk of damage caused by
immersion.
The water-resistance of a watch comes from its joints.
Because these joints are exposed to different types of
ex ternal stress (cosmetics, perspiration, temperature
changes), your watch may become less water-resistant with
time. As a consequence, we recommend you have your watch
checked every 12 to 24 months to guarantee it remains fully
water-resistant.
| 17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clifton 65718Clifton 65720Clifton 65730Clifton 65731Clifton 65743Clifton 65745 ... Show all

Table of Contents