Assembly - Texas Equipment AE48 Assembly Instructions Manual

4. Assembly

Before assembly begins, you should put all the parts out.
Fit a plastic sleeve on each side of the double
blades.
Attach a suspension in the center hole in the ear
of Justice. Note that the ring of the wheel sus-
pension is to face the shorter end of the shaft.
Tighten firmly.
Insert from the short side of the shaft of a bolt in
the hole of the wheel suspension closest to the
shaft. Tighten not quite.
The following is mounted on the short piece of the
shaft. Notice how the blades turn.
1. Attach a set of double knives (blades facing in)
2. Attach an adapter
3. Attach a set of double knives
(blades facing out)
4. Attach an adapter
5. Attach one washer.
www.texas.dk
5