Tiger JKL-T10W User Manual page 23

14
Cleaning and Maintenance
Parts to wash when dirty
Main unit
Inner lid release button
Steam vent lid
sensor gasket
Heatsink
Lid
Upper
casing
Center sensor
Hook button
・ Wipe with a well-wrung-out cloth.
・ Remove any burnt rice from the heating coil or the
center sensor.
・ Remove any burned rice, uncooked rice, or other
matter from the upper casing and around the hook
button or inner lid-release button.
Air intake ・ Air exhaust
Use a cotton swab or similar item to remove dirt.
Air intake
Air exhaust
Power cord
Power plug
Power plug
plug
plug
Power cord
Wipe with a dry cloth.
Caution
Do not splash water on the main unit, immerse the
main unit in water or put water inside the main unit.
Do not use if dust or other materials are clogging
the intake and exhaust vents on the bottom of the
main unit.
This causes the temperature inside the main unit to
rise, leading to damage or a fire.

Detaching and installing the inner lid
Detach the inner lid
Inner lid release
button
Lift.
Remove.
Installing the inner lid
①
Insert.
②
Press until you
hear a "click."
Caution
Do not pull on the lid gasket or the inner lid gasket.
If they come off, they cannot be put back on. If the
lid gasket or inner lid gasket comes off, consult the
store where you purchased your rice cooker.
Outer lid Inner lid
gasket gasket
Lid
Inner lid
When putting in the steam lid sensor gasket, make
sure that it is facing in the correct direction and
insert it all the way in. (See illustration.)
Inserting it in the wrong direction can cause steam
leaks and other problems.
Steam lid sensor
gasket
Inner lid gasket
The steam lid sensor Steam lid sensor gasket
gasket is inserted
backwards.
Inner lid
gasket
Inner lid gasket Inner lid
How to detach and attach the steam cap.
Detach the inner lid
1
Detach the inner lid. →P.43
2
Hold the cap lid flange with your fingers
and pull to remove.
Flange
Cap lid
3
Turn the cap lid counter-clockwise and
detach it.
①
②
Cap lid