Post Error Indicators; Recoverable Post Errors - HP ProLiant SL165s G7 Software Configuration Manual

ensure that the server is properly functioning. This diagnostic function automatically runs each time the
server is powered on.
These diagnostics, which reside in the BIOS ROM, isolate server-related logic failures and indicate the
board or component that needs to be replaced, as indicated by the error messages. Most server
hardware failures are accurately isolated during POST. The number of tests displayed depends on the
configuration of the server.

POST error indicators

When POST detects a system failure, it will display a POST error message.

Recoverable POST Errors

Whenever a non-fatal error occurs during POST, an error message describing the problem appears
onscreen. These text messages are displayed in normal video (white text on black background). It
shows the details of the error.
In some cases an error message may include recommendations for troubleshooting or require that you
press the Enter key to display recommendations. Follow the instructions on the screen.
It is recommended that you correct the error before proceeding, even if the server appears to boot
successfully. If your system displays one of the messages marked below with an asterisk (*), write
down the code and message and contact your HP Customer Support provider.
When no POST error message is displayed but the server stops during POST, listen for beep codes.
lists the most common POST error messages with their corresponding troubleshooting
Table 23
recommendation.
Table 23
POST error message
601
605
611
612
613
620
621
622
623
624
626
627
Error: BMC Not Responding
BMC Has Detected Fatal Hardware Error
Internal User Area Of BMC FRU Corrupted
Controller Update 'boot block' Firmware Corrupted
Controller Operational Firmware Corrupted
Non-Redundant Fan Failure or Missing
Redundant Fan Configuration, One Fan Failure or Missing
Redundant Fan Configuration, Multiple Fans Failure or Missing
Temperature Violation Detected
Waiting 5 minutes for system to cool
Press ESC Key to resume booting without waiting for the system to cool
Warning: Pressing ESC is NOT recommended as the system may shutdown
unexpectedly
Power Supply Failure or Power Supply Unplugged
Update SDRR/Configuration Image failed
Invalid or Unknown SKU/Chassis ID
System BIOS configuration 34