Exit Menu; Recording Custom Setup Values; Loading System Defaults - HP ProLiant SL165s G7 Software Configuration Manual

Exit menu

The Exit menu displays several options on how to quit the Setup Utility. Select any of the exit options
then press Enter.
Figure 27 Exit menu
Table 22
Exit menu fields
Option
Save Changes and Exit
Discard Changes and
Exit
Discard Changes
Restore Default Setting

Recording custom Setup values

Write down the settings from the Setup Utility and keep them in a safe place. If the custom values ever
need restoring after clearing CMOS, you must run the Setup Utility and enter these custom settings
again. Having a record of these custom settings makes this much easier.

Loading system defaults

If the system fails after you make changes in the Setup menus, reboot the server, enter Setup, and
load the system default settings to correct the error. These default settings have been selected to
optimize the server's performance. Setup default settings are quite demanding in terms of resource
consumption. If you are using low-speed memory chips or other types of low-performance components
and you choose to load these settings, the system might not function properly.
Description
Save the changes made and exit the Setup Utility.
Discard the changes and exit the setup utility.
Discard the changes in the utility.
Restore the default settings for all BIOS setup fields.
System BIOS configuration 32