Post-Related Troubleshooting - HP ProLiant SL165s G7 Software Configuration Manual

Table 23
POST error message
601
628
194
192
197
198
193
196
195
160
005
041
040
048
00B
010
00C
003
701
702
120
122

POST-related troubleshooting

Refer to HP ProLiant SL165s Maintenance and Service Guide for troubleshooting guidelines.
Error: BMC Not Responding
Please check Front panel, System ID Jumper or Riser card
Press F1 to Continue
Redundant Power Supply Mismatch
CPUID, Processor family are different
L3 cache size mismatch
Processor speeds mismatched
Processor QPI speed mismatch detected.
CPUID, Processor stepping are different
CPUID, Processor Model are different
Front side bus mismatch. System halted.
Processor missing microcode
CMOS Checksum Bad
Display memory test failed
Refresh timer test failed
Password check failed
CMOS Memory Size Wrong
Floppy Controller Failure
RAM R/W test failed
CMOS Battery Low
Insufficient Runtime space for MPS data.
System may operate in PIC or Non-MPS mode.
No enough APIC ID in range 0-0Fh can be assigned to IO APICs.
(Re-assigning CPUs' local APIC ID may solve this issue)
MPS Table is not built! System may operate in PIC or Non-MPS mode.
$A0CCMOS Cleared by Jumper. Restore the Jumper and Continue.
$A0CPassword Cleared By Jumper. Restore the Jumper and Continue.
System BIOS configuration 35