HP ProLiant SL165s G7 Software Configuration Manual page 25

Table 16
Remote Access Configuration submenu fields (2)
Field
VT-UTF8 Combo Key
Support
Sredir Memory
Display Delay
Trusted Platform Module submenu
Figure 19 Trusted Platform Module submenu
Table 17
Trusted Computing submenu fields
Field
TCG/TPM Support
Description
Select the target Terminal Type to VT100. This item disappears when
Remote is disabled.
Select the target Terminal Type to VT-UTF8. This item disappears when
Remote Access is disabled.
Disable VT-UTF8 Combination Key Support for ANSI/VT100 terminals. Disabled
Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals.
This is the default setting.
Do not give the delay in seconds to display memory information.
Give the delay in one second to display memory information.
Give the delay in two second to display memory information.
Give the delay in four second to display memory information.
Description
Enable TPM TCG (TPM 1.1/1.2) support in BIOS.
Disable TPM TCG (TPM 1.1/1.2) support in BIOS.
Options
VT100
VT-UTF8
Enabled
No Delay
Delay 1 Sec
Delay 2 Sec
Delay 4 Sec
Options
Yes
No
System BIOS configuration 25