Exit Menu
Figure 51 Exit menu of the BIOS Setup Utility
Table 13
Exit menu fields
Option
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Option Default
BIOS Update
Perform the steps below to update BIOS:
1.
Download the Smart Component (SPxxxxx.exe) to a directory on your hard drive.
2.
Execute (SPxxxxx.exe) and followed with direction to complete the steps. "ProLiant Flash Update" interface
will appear.
3.
Select items which need to execute:
○
Create a bootable ROMPaq diskette
○
Create a bootable ROMPaq USB Key
○
Create a bootable ROMPaq CD
○
ROMPaq Diskette Flat Files
○
Create a label for the ROMPaq diskette
○
Network ROM Flashing Capabilities
4.
Reboot SL165z G6 Server with one of the above bootable devices and make sure the BIOS setting allows
booting from the USB disk.
5.
Follow the on-screen instructions to finish the flashing of the BIOS.
Description
Save the changes made and exit the Setup Utility
Discard the changes and exit the setup utility
Discard the changes in the utility
Loads the default settings for all BIOS setup fields.
Contents 68