Miele KWT 6312 UGS Operating And Installation Instructions page 8

IMPORTANT SAFETY INSTRUCTIONS

The more coolant there is in a wine conditioning unit, the larger
the room it should be installed in. In the event of a leakage, if the ap-
pliance is in a small room, there is the danger of combustible gases
building up. For every 0.28 oz (8 g) of coolant at least 35.3 cubic feet
3
(1 m ) of room space is required. The amount of coolant in the wine
conditioning unit is stated on the data plate inside the appliance.

To avoid the risk of damage to the wine conditioning unit, make
sure that the connection data (fuse rating, frequency and voltage) on
the data plate corresponds to the household supply.
Check that this is the case before connecting the wine conditioning
unit. Consult a qualified electrician if in any doubt.

The electrical safety of the wine conditioning unit can only be
guaranteed when correctly earthed. It is essential that this standard
safety requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician.

Reliable and safe operation of the wine conditioning unit can only
be guaranteed if it is connected to the power supply.

Do not connect the appliance to the electrical supply with a power
bar or extension cord. These are a fire hazard and do not guarantee
the required safety of the appliance.

Do not use the appliance in areas where there may be moisture or
splashing water (e.g., garages, laundry rooms, etc.). Moisture can
reach the electrical components and cause a short circuit.
8