Miele KWT 6312 UGS Operating And Installation Instructions page 51

Messages in the display
Message
The alarm symbol  is
lit up in the display and
an alarm is also sound-
ing.
The alarm symbol  is
flashing in the display
and an alarm is also
sounding.
The Change Active Air-
Clean filter symbol  is
lit up.
A dash is lit up up/flash-
ing in the display.
The sym-
bols F1 to F3 or S1 to S3 a
ppear in the display.
Frequently asked questions
Possible cause and solution
The door alarm has been activated.
 Close the appliance door. The alarm sym-
bol  will go out and the alarm will stop.
The temperature in the wine conditioning unit has
risen higher or fallen lower than the temperature
which has been set.
For instance, this could be due to
– the door being opened too frequently,
– blocked ventilation grilles,
– a lengthy interruption to the power supply.
 Correct the condition that caused the alarm. The
alarm symbol  will go out as soon as the cause
of the alarm has been rectified.
This is the reminder to change the Active AirClean fil-
ter.
 Replace the Active AirClean filter and then confirm
the filter change in settings mode (see "Active Air-
Clean Filter").
Only temperatures within the range of the appliance
temperature will be displayed.
There is a fault.
 Contact Miele Technical Service.
51