Table of Contents
Advertisement
To Prepare
4.3
CONNECT TO A COMPUTER
1 Connect a USB 3 cable to the USB port on the computer.
2 Open the hinged cover on the camera.
3 Connect the USB 3 cable to the USB port on the camera.
Note!
When connected to a computer, the following applies:
●
The destination medium and location are controlled from
Phocus.
●
Exposure settings, including ISO, aperture and exposure
time, can be controlled from Phocus or from the camera.
In addition extra tools such as Live Video, remote focus
control are available. See Phocus User Manual for full
description.
Note!
The buttons on the Sensor Unit have no functions when the
Camera is connected to a computer.
When initiating a shot from Phocus, the computer sends a
signal to the Sensor Unit, which triggers the shutter (and
strobe/flash, if any). The back then sends the capture over the
USB connection to the computer, where it is displayed on the
computer screen and saved as a 16-bit 3F file in the currently
selected folder on the computer hard disk.
H6D
USER GUIDE
www.hasselblad.com
55
Advertisement
Table of Contents
