Remove A Memory Card (Cfast Or Sd) - Hasselblad H6D-50C User Manual

To Prepare
4.9

REMOVE A MEMORY CARD (CFAST OR SD)

Remove CFast card
1 Open the CFast and SD card slot cover on the sensor unit (A)
by pushing it to the left or towards the back of the camera.
The slot cover will then rotate out 90 degrees.
2 Press the CFast card (B) a little way in and then release it.
The CFast card will then move out from the CFast card slot
(B).
3 Grab the card and pull it away from the sensor unit.
4 Close the slot cover (D) by rotating it back and pushing it in
place towards the front of the camera to lock it into position.
Remove SD card
1 Open the memory card slot cover on the sensor unit (A).
2 Press the SD card (C) a little way in and then release it. The
SD card will then move out from the SD card slot (C).
3 Grab the card and pull it away from the sensor unit.
4 Close the slot cover (D) by rotating it back and pushing it in
place towards the front of the camera to lock it into position.
Note!
Do not remove a memory card from the sensor unit if the
"Ready light" is blinking (placed in the lower right corner on
the Sensor Unit Display), as this will corrupt the files on the
card and result in data loss. The card will also need to be
reformatted.
H6D
USER GUIDE
A
B
D
61
C
www.hasselblad.com