Computer System Requirements; Warnings And Restrictions; Connecting To A Computer; Firmware Updates - Hasselblad CFV 50c User Manual

CFV 50c
 

COMPUTER SYSTEM REQUIREMENTS

Final image-storage and correction requires a certain minimum standard regarding computer capabilities. Large image
files require a high-performance computer with plenty of memory, advanced graphics capabilities and a recent operating
system. In most cases, you will want your computer to include a FireWire 800/400 connector, which will enable you to load
images directly from the camera. To load images stored on the removable compact-flash card, you could instead use a
compact-flash card reader, but we still recommend FireWire for maximum flexibility.
 

CONNECTING TO A COMPUTER

To connect to a computer, attach a FireWire cable from the FireWire port on a computer to the port on the side of the CFV
50c. Ensure the orientation of the plug is correct.
When you are connected to a computer, the following applies:
• The CFV 50c will take power via the FireWire cable if it is available (not all computers can supply power, notably PC lap-
tops). This will help conserve the battery power.
• When using a Thunderbolt to FireWire adapter ensure you select the correct setting (see p 27 in this manual: Settings >
Service > Tethered power)
• The destination medium and location are controlled from Phocus.
 

WARNINGS AND RESTRICTIONS

• If you want to power the CFV 50c from a PC laptop (as opposed to a Macintosh laptop), you must ensure that the
FireWire port on the computer is capable of supplying power. Please note the following:
– Most recent Macintosh computers are compatible, both desktops and laptops.
– Most recent desktop PC computers are compatible.
– Most laptop PC computers are not compatible (but can be modified in many cases).
• Keep the CFV 50c and computer equipment away from moisture wherever possible. If the CFV 50c becomes wet,
disconnect from power and allow it to dry before attempting to operate again.
• Always take great care when you remove the CFV 50c for cleaning as the exposed CCD sensor protective filter is
vulnerable to damage.
• Keep all cables connected to or from the CFV 50c and computer out of the way where they cannot be tripped over.
 

FIRMWARE UPDATES

If you have registered your CFV 50c you should automatically receive e-mail informing you of the latest developments. Oth-
erwise you are advised to make regular checks regarding firmware updates.
When updating you should also study the accompanying 'Release Notes' or 'Read Me' files where you will find details about
improvements, developments and changes.
 

USER MANUAL

This user manual is primarily designed for on-screen PDF reading to exploit search tools etc. However, there is a sufficiently
wide left margin to allow one-sided print outs to fit an ISO standard ring binder if required.
Please note that the format is A4 to conform with the most common standard. Therefore if printing out to US Letter format
or similar please ensure you select "Fit to Printable Area" in the page scaling dialogue.
5