Overview
3.23 ACCESSORY CONNECTION
There are two accessory retaining screw threads (M5) as
well as a databus connector on the left hand side of the camera
body, protected beneath a cover (A).
How to remove the Databus Connector cover
1 Remove the cover by first lifting the left hand edge (A) a
little.
2 Slide the cover to the left (B).
3 Lift the front edge of the cover first (A).
4 Remove the cover.
5 Attach the Databus cable.
3.24 PC FLASH CONNECTOR
A PC connector for non TTL flash synchronisation (3) is located
on the left side of the body. It is protected by a captive rubber
plug.
H6D
USER GUIDE
B
A
3
www.hasselblad.com
43