Table of Contents
Advertisement
To Use
EXPOSURE SETTINGS MODES
MAIN MENU > CAMERA SETTINGS > EXPOSURE
1 Press the Camera icon on the Sensor Unit display.
2 The Camera Settings Menu appears.
3 Press the Exposure Mode Settings Menu.
Swipe right or press Menu / EXIT button to get back to Main
Menu.
Here you can only select the Spot Mode and set True Exposure
On or Off. To change the Exposure mode Swipe Down to display
the Control Screen or press the EXP button on the Viewfinder.
Exposure are controlled either manually or by using one of four
automatic modes. These have the following designations on the
grip display:
M
Manual.
A
Aperture (priority).
S
Shutter (priority).
P
Program.
Pv
Program variable.
In each mode you can see both the aperture and the shutter
speed information on the grip display, viewfinder display and if
set, the sensor unit display.
In manual mode, aperture is set by the front scroll wheel and
the shutter speed by the rear scroll wheel unless set otherwise
in Camera Settings > Configuration > Front Wheel.
In Automatic Modes, the aperture and shutter speed settings
are controlled by the camera, either partially or completely
according to setting. Within this mode there are four choices.
SELECT METERING / EXPOSURE SETTING MODES
1 Press the EXP button on the viewfinder.
2 Turn the Rear scroll wheel to make a Metering method
selection and the Front scroll wheel to make an Exposure
method selection.
3 Press the EXP button again or half-press the Shutter Release
button.
H6D
Exposure Settings Menu
CAMERA SETTINGS:
Increment Step Size
Exposure Adjust:
Exposure Mode
True Exposure:
Low Flash Warning:
Extra Mirror Delay:
Always Return Mirror:
Image Orientation
Grip Display View
Exposure settings on
Grip Display.
USER GUIDE
EXPOSURE
Exposure:
1/2 step
1/3 step
Spot Mode:
Normal
Flash
Sync:
Normal
Exposure Lock
Flash Ready:
Lens:
Out of Range:
Mirror
None
Orientation:
Auto
www.hasselblad.com
79
Advertisement
Table of Contents
