Table of Contents
Advertisement
To Prepare
4.11 SET DRIVE MODE
There are two drive modes, Single Drive Mode and Continuous
Drive Mode.
A Long press on ISO button (A) toggles between Single Drive
Mode and Continuous Drive Mode. It can also be set from the
Control Screen.
Single Drive Mode
In Single Drive Mode, a capture is made when the shutter
release button is pressed.
To make the next capture, you must first release the shutter
release button and then press the shutter release button again.
Continuous Drive Mode
In Continuous Drive Mode, the camera automatically captures
images. The Camera is ready for the next capture in a
Continuous Drive Mode as long as you keep the shutter release
button pressed down.
Note!
The speed is dependent on the time it takes to save the capture
according to equipment.
H6D
Single drive
Continuous drive
USER GUIDE
A
www.hasselblad.com
63
Advertisement
Table of Contents
