Charging Time (Full Charge); Charging By Connecting To A Computer - Hasselblad Lusso Operation Manual

Charging the battery pack
Notes
• If the charge lamp on the camera flashes when the AC Adaptor is connected to the wall
outlet (wall socket), this indicates that charging is temporarily stopped because the
temperature is outside the recommended range. When the temperature gets back within
the appropriate range, the charging resumes. We recommend charging the battery pack
in an ambient temperature of between 10°C to 30°C (50°F to 86°F).
• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If
malfunctions occur while using the AC Adaptor, disconnect the plug from the wall
outlet (wall socket) immediately to disconnect from the power source.
• When the camera is being used for the first time or when you use a battery pack that
has not been used for a long time, the charge lamp may flash quickly when the battery is
charged for the first time. If that happens, remove the battery pack from the camera and
then re-insert it to recharge.
• Do not continuously or repeatedly charge the battery without using it if it is already
fully charged or close to fully charged. Doing so may cause a deterioration in battery
performance.
• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall
socket).
• Be sure to use only recommended Hasselblad battery packs, micro USB cable (supplied)
and AC Adaptor (supplied).

Charging time (Full charge)

The charging time is approximately 310 min. using the AC Adaptor (supplied).
Notes
• The above charging time applies when charging a fully depleted battery pack at a
temperature of 25°C (77°F). Charging may take longer depending on conditions of use
and circumstances.

Charging by connecting to a computer

The battery pack can be charged by connecting the camera to a computer using a micro
USB cable.
GB
40