Table of Contents
Advertisement
Overview
FORMATTING MEMORY CARDS
MAIN MENU > GENERAL SETTINGS > STORAGE
The camera is only able to read and write to storage media
that have been formatted correctly. New cards sometimes
have no formatting, or you might want to convert a card that
is currently using a format that the camera cannot read. In
either case, you must reformat both CFast cards and SD cards
in the sensor unit for H6D use.
There are two ways to format cards. Use either the format
button on the grip (quickest), or the sensor unit menu.
FORMAT BUTTON
Press the Format button (A) on the camera grip. It is purposely
recessed to avoid unintentional use, so use a ballpoint pen
or similar. It is also possible to click the button with a hard
press with the tip of your thumb. A pop up is displayed on the
sensor unit for confirmation.
FORMAT MEMORY CARDS VIA SENSOR UNIT
MAIN MENU > GENERAL SETTINGS > STORAGE
1 Press MENU.
2 Navigate to General Settings.
3 Choose Storage.
4 Navigate to Format Card.
5 Navigate to Format CFast or Format SD.
6 Confirm by pressing Format (Display button).
Note!
Only UDMA/type 4/60MBs (or 400x) cards or better are
recommended for H6D use.
Note!
All CFast and SD memory cards should be formatted in the
sensor unit before using them the first time.
Note!
You can add a Favourite function on the Main Menu if you often
use formatting.
H6D
USER GUIDE
FORMAT
Format CFast?
All content will be erased!
Format
Exit
Storage Menu
GENERAL SETTINGS:
STORAGE
Format Card
Format CFast
Format SD
Destination
Primary Image Slot:
CFast
Secondary Slot Usage:
None
www.hasselblad.com
48
A
Advertisement
Table of Contents
