Tele System ts3002 User Manual page 34

Digital satellite receiver free to air
Table of Contents

Advertisement

Available languages

Available languages

TELE System
1.3 Connections
Satellite digital TV is transmitted via numerical type signals from satellites. This is why it is essential to make
sure that the antenna is correctly pointed. If your receiver is unable to tune into any channels, before
contacting the aftersales service, it is important that you have your antenna plant controlled by a specialist
antenna installer.
CAUTION!
It is good practise to connect the receiver to other appliances (e.g. TV, VCR, DVD, etc.) and the antenna before plugging
in the mains lead. When the receiver is powered, electrical voltage differences may be created when plugging in the
jacks, which may generate currents that could damage the appliances.
1.3.1 Direct TV Scart connection
CAUTION!
The direct TV Scart connection should always be used as a first operating test since other more complex connections
involving other audio-video appliances, may give malfunctions that are not caused by faults and/or defects of the actual
appliances, but by problems of incompatibility.
4

Advertisement

Table of Contents
loading

Table of Contents