Basic Settings Page Definitions; Table 7: Basic Settings Page - Grandstream Networks HT814 Administration Manual

Displays relevant information regarding the FXS ports about their DND and call forward
Port Options
features.
Provision Displays provisioning status.
Core Dump Provides generated core dump file if unit malfunctions. Clean will be displayed if no
issues.

Basic Settings Page Definitions

Basic Settings
New End User Configures user level password. Case sensitive and max. length of 25 characters.
Password
Confirm End User Re-enter the end user password to confirm change user password on web GUI to avoid
Password typo or mistakes.
Web Port Customizes HTTP port used to access the HT812/HT814 web UI. Default is 80.
Telnet Server Enables / Disables access via telnet. Default is Yes (activated).
IP Address Specifies IP Address to use on HT812/HT814.There are 3 modes to operate the
HT812/HT814:



Specifies the name of the client. The name may or may not be qualified with the local
DHCP hostname
domain name. This field is optional but may be required by ISP.
Exchanges vendor class ID by clients and servers to convey particular configuration or
DHCP vendor class
ID other identification information about a client. Default is HT8XX.
PPPoE account ID Defines the PPPoE username. Necessary if ISP requires you to use a PPPoE (Point
to Point Protocol over Ethernet) connection.
PPPoE password Specifies the PPPoE account password.
PPPoE Service Defines PPPoE service name. If your ISP uses a service name for the PPPoE

Table 7: Basic Settings Page

DHCP mode: all the field values for the static IP mode are not used (even though
they are still saved in the flash memory.) The HT812/HT814 acquires its IP address
from the first DHCP server it discovers from the LAN it is connected.
Use PPPoE: set the PPPoE account settings. If selected, HT812/HT814 attempt to
establish a PPPoE session if any of the PPPoE fields is set.
Static IP mode: configure IP address, subnet Mask, default router IP address, 1st
preferred DNS server, 2nd preferred DNS server. Default settings is zero.
HT812/HT814 Administration Guide
P a g e | 22