Grandstream Networks HT814 Administration Manual page 27

not yield any response for configured number of times (minimum 3), the device will
detect
network restart the TCP/IP stack. If the STUN server does not respond when the device boots
connectivity up, the feature is disabled. Default setting is No.
Use DNS to detect Uses DNS to detect WAN side network problems. Default setting is No.
network
connectivity
Verify host when Enables / disables the host verification when using HTTPS.
using HTTPS
Firmware upgrade
Selects firmware upgrade/provisioning method: TFTP, HTTP or HTTPS.
and provisioning
Firmware Server
Sets IP address or domain name of firmware server. The URL of the server that hosts
Path
the firmware release. Default is fm.grandstream.com/gs.
Config Server Path Sets IP address or domain name of configuration server. The server hosts a copy of the
configuration
fm.grandstream.com/gs.
XML Config File Decrypts XML configuration file when encrypted. The password used for encrypting the
Password XML configuration file using OpenSSL.
HTTP/HTTPS User
Enters user name to authenticate with HTTP/HTTPS server.
Name
HTTP/HTTPS
Enters password to authenticate with HTTP/HTTPS server.
Password
Firmware File Checks if firmware file is with matching prefix before downloading it. This field enables
Prefix user to store different versions of firmware files in one directory on the firmware server.
Firmware File Checks if firmware file is with matching postfix before downloading it. This field enables
user to store different versions of firmware files in one directory on the firmware server.
Postfix
Config File Checks if configuration files are with matching prefix before downloading them. It
Prefix allows user to store different configuration files in one directory on the provisioning
server.
Checks if configuration files are with matching postfix before downloading them. It
Config File
Postfix allows user to store different configuration files in one directory on the provisioning
server.
Allow DHCP Obtains configuration and upgrade server's information using options 66 from DHCP
Option 66 to server.
file to be installed
HT812/HT814 Administration Guide
on the HT812/HT814. Default is
P a g e | 26