Grandstream Networks HT814 Administration Manual page 36

Configures the SIP User-Agent Header.
Use SIP User Agent
Header
Distinctive Ring Customizes the Ring Tone 1 to 3 with associate caller ID: when selected, if caller ID is
Tone configured, then the device will ONLY use this ring tone when the incoming call is from
the Caller ID. System Ring Tone is used for all other calls. When selected but no Caller
ID is configured, the selected ring tone will be used for all incoming calls using the FXS
port. Distinctive ring tones can be configured not only for matching a whole number, but
also for matching prefixes. In this case symbol * (star) will be used.
For example: if configured as *617, Ring Tone 1 will be used in case of call arrived from
the area code 617. Any other incoming call will ring using cadence defined in parameter
System Ring Cadence located under Advanced Settings Configuration page.
Note: If server supports Alert-Info header and standard ring tone set (Bellcore) or
distinctive ring tone 1-10 is specified, then the ring tone in the Alert-Info header from
server will be used. Bellcore rings and tones are independent from custom ring tones.
The custom ring tones can also be specified by alert-info header, for example Alert-
Info: ;info=ring5
Disable Call Disables receiving a second incoming call when the line is engaged. Default is No.
Waiting
Disable Call Disables displaying caller ID when receiving a second incoming call. Default is No.
Waiting Caller ID
Disables playing call waiting tone during active call when receiving a second incoming
Disable Call
Waiting Tone call. The CWCID will still be displayed. Default is No.
Disable Connected Disables displaying the number of the person answering the phone. Default is No.
Line ID
Disable Receiver Enables / disables the warning to alert that the phone has been left off-hook for an
Off hook Tone extended period of time.
Default is No.
Disable Reminder Enables playing the reminder ring. Default is No
Ring for On-Hold
Call
Disable Visual MWI Disables use of visual message waiting indicator when there is an unread voicemail
message. Default is No.
Do Not Escape '#' Replaces # by %23 in some special situations. Default is No.
as %23 in SIP URI
HT812/HT814 Administration Guide
P a g e | 35