Replacing A Fan Module - Lenovo NeXtScale n1200 Installation And Service Manual

Figure 17. Removal of a fan module
Step 1. Grasp the fan module handle and press the release tab.
Step 2. Slide the fan module out of the chassis and place it on a flat, static-protective surface.
Notes:
1. When you remove a fan module from the chassis halfway, release the release tab to avoid the
slip of the release tab.
2. When you remove a fan module from the chassis, the remaining fan modules will begin to run
at full speed, which will be clearly audible.

Replacing a fan module

Use these instructions to install a fan module in the NeXtScale n1200 Enclosure. You can install a fan module
while the NeXtScale n1200 Enclosure is powered on.
To install a fan module, complete the following steps.
32
Lenovo NeXtScale n1200 Enclosure Installation and Service Guide