Attaching The Cable Holder - Fujitsu 2737 User Manual

4.7

Attaching the Cable Holder

■ Confirm the components, and prepare the necessary tools.
Model
2724
2737
2742
2616
2624
2642
Confirm that all components have been delivered (see the table below).
Cable holder x 1, M5 flat head screw x 1, M5 core spring nut x 1
Also, prepare the necessary tools:
・ Phillips screwdriver (No. 2 bit): For the M5 flat head screw
The procedure for attaching the cable holder is as follows:
Install the core spring nut on the rack frame, and secure the cable holder.
The procedure for attaching the cable holder is shown below.
168
Type name
Front
19R-27CM1
19RB27CM1
19R-26CM1
19RB26CM1
19R-26CM11
19RB26CM11
Component and quantity
Rear
19R-27CM2
19RB27CM2
19R-26CM2
19RB26CM2
19R-26CM21
19RB26CM21