Fujitsu 2737 User Manual page 145

3
Install bar nuts for the hinges and core spring nuts.
Install some of the parts that were removed in step 2, on the side horizontally opposite the
standard side.
・ Insert bar nuts for the hinges in the right H frame, and secure them with M6 hexagon
socket set screws.
・ Insert a core spring nut near the center of the left H frame.
(For Models 2724, 2737, 2742, 2616, and 2624): Insert M6 core spring nuts.
(For Model 2642): Insert M5 core spring nuts.
For information on the procedure for installing the core spring nuts, see "4.2 Installing and
Removing Core Spring Nuts".

When inserting a bar nut for the hinge in the groove of the aluminum frame, rotate
it in the groove.

Align the center of the M6 hexagon socket set screw of the bar nut for the hinge
with the punch on the aluminum frame.
 Align the center of each screw hole of the M5 or M6 core spring nuts with the
respective punches on the aluminum frame.
Bar nut for hinge
M6 hexagon socket
set screw
M6 core spring nut
Punch
Punch
Model 2724/2737/2742
Model 2616/2624
Bar nut for hinge
Punch
M6 hexagon socket
set screw
M5 core spring
nuts
Punches
Punches
Model 2642
4 Handling the Rack after Installation
E
145