Fujitsu 2737 User Manual page 185

4.12.1 Attaching the Quake Proof Stabilizer kit
The procedure for attaching the Quake Proof Stabilizer Kit is shown below.
1
Secure the parts to the corresponding sides of the rack using four mounting
bolts per part.
2
Anchor the front part and rear part to the floor, each with two bolts.
3
Anchor the side parts to the floor, each with three bolts.
Illustration of the attached Quake Proof Stabilizer kit
 Customers are requested to provide their own components for floor anchoring.

The floor anchoring hole has a diameter of 20 mm, and the board of the Quake
Proof Stabilizer kit has a thickness of 4.5 mm.
4 Handling the Rack after Installation
E
185