Precautions On Rack Installation And Operation; Installation Site Precautions - Fujitsu 2737 User Manual

2
Precautions on Rack Installation and
Operation
This section explains precautions on rack delivery, installation, and operation.
2.1

Installation Site Precautions

Warning
・ Do not place the rack in an unstable location subject to excessive vibration
(acceleration of over 2 m/s
may adversely affect the stable operation of equipment or cause the rack to tip
over, potentially resulting in serious injury.
Measures against earthquakes with an acceleration of more than 2.5 m/s
gal) must be taken, such as fixing the rack and rack-mount devices in place.
・ Confirm that the rack is installed on a surface with an adequate load-bearing
capacity.
If the floor has an insufficient load-bearing capacity, it may collapse since the
maximum load associated with the rack may reach about 1,000 kg.
・ Secure a sufficient installation area to ensure normal operation and maintenance
of the rack system.
・ Do not place metallic objects or containers bearing water, such as vases,
flowerpots, or drinking glasses, on or near the rack. It may lead to failure, fire, or
electric shock.
・ Avoid placing the rack in locations exposed to oil vapors or excessive humidity or
dust, or with poor ventilation, or locations where flammable materials are stored.
It may lead to failure, fire, or electric shock.
Caution
・ To avoid the risk of failure, do not install the rack in locations exposed to high
temperatures (including areas near heaters) or direct sunlight.
Do not install the rack in locations where temperatures drop below 10 ℃ .
Doing so may lead to failure.
・ Always confirm that rack openings such as ventilation holes are not obstructed.
Blocking ventilation holes may cause the internal temperature of the rack to
become excessively high, leading to failure or fire.
2
(200 gal)), or in a location that is not level. Doing so
2 Precautions on Rack Installation and Operation
2
(250
E
107