Fujitsu 2737 User Manual page 153

Rack post
M6 cage nut
M6 screws
 In step 2, you will mount the table on rear brackets L and R. Temporarily fix the
rear brackets in position to the extent that the table will not drop down when it is
placed on the rear brackets.

Carefully follow the installation directions for rear brackets L and R.
2
Temporarily mount the table by inserting the hook at the front of the table
into the square hole right above the M6 cage nut that was attached in step
2 according to "4.4.1 Inserting cage nuts".
Place the rear of the table on the rear brackets L and R that were attached in step 1.
Table
Hook
Rear bracket R
M6 cage nut
Rear bracket L
M6 screws
Square hole for inserting hook
M6 cage nuts
4 Handling the Rack after Installation
E
153