Fujitsu 2737 User Manual page 167

3
Peel off the tape that temporarily fixes the cable arm in position, and secure
the arm to the rear bracket with the supplied M5 screw.
4
Tighten the panel fastener on the front of the table unit to secure the unit in
position. This completes the mounting work.
Caution: For transport (shipment) of the rack with the table mounted, we recommend placing cush-
ioning material (reused packing material) in gaps to prevent the cable arm from knocking
against the rack.
Tape
Rail unit
M5 screw
Cable arm
Panel fastener
Cushioning material
Cable arm
4 Handling the Rack after Installation
E
167