Minimum RSSI (dBm)
Device Membership: Used to add or remove paired access points to the network group
Click on
to add the GWN7600 to the network group, or click on
Users can Also add a device to a Network Group from Access Points Page:
Select the desired AP to add to a Network Group and click on
Enter the minimum RSSI value in dBm. If the signal value is smaller than
the configured minimum value, the client will be disconnected. The input
range is from "-94" or "-1".
Figure 25: Device Membership
GWN7600 User Manual
to remove it.
.
P a g e
|
31