Ceiling Mount; Figure 6: Ceiling Mount - Steps 1 & 2; Figure 7: Ceiling Mount - Step 3; Figure 8: Ceiling Mount - Step 4 - Grandstream Networks GWN7600 User Manual

Ceiling Mount

Step 1:
Remove the ceiling tile.
Step 2:
Place the ceiling backing plate in the center of the ceiling tile and mark
the mounting screw holes (screw holes DIA 5.5mm, reticle hole DIA
25mm).
Figure 6: Ceiling Mount – Steps 1 & 2
Ceiling Mounting Bracket
Step 3:
M3 nut
Insert the screws through the mounting bracket.
Step 4:
Connect the power cable and the Ethernet cable (RJ45) to the correct
ports of your GWN7600.
M3.0x50 screw
Figure 7: Ceiling Mount – Step 3
Step 5:
Align the arrow on the GWN7600AP with the arrow on the locking tab
of the mounting bracket and ensure that your GWN is firmly seated on
the mounting bracket and connect the network and power cables.
Step 6:
Turn the GWN clockwise until it locks into place and fits the locking
tab.
Figure 8: Ceiling Mount – Step 4
Note:
Ceiling mounting is recommended for optimal coverage performance.
Figure 9: Ceiling Mount – Steps 5 & 6
P a g e | 17
GWN7600 User Manual