Ping/Traceroute; Figure 23: Ip Ping - Grandstream Networks GWN7610 User Manual

Device Choose a device plugged to USB port to save the capture once started.
Set a File size that the capture will not exceed (Optional field)
File Size
Rotate Count Set a value for rotating captures(Optional Field)
Choose if you want to get all traffic or only outgoing or incoming to the choses
Direction
interface.
Source Port Set the Source Port to filter capture traffic coming from the defined source port.
Destination Port Set the Destination Port to filter capture traffic coming from the defined port.
Source IP Set the Source IP to filter capture traffic coming from the defined source IP.
Set the Destination IP to filter capture traffic coming from the defined destination
Dest IP
IP.
Choose ALL or a specific protocol to capture (IP, ARP, RARP, TCP, UDP, ICMP,
Protocol
IPv6)

Ping/Traceroute

Ping and Traceroot are useful debugging tools to verify reachability with other clients across the network.
The GWN7610 offers both Ping and Traceroot tools for IPv4 and IPv6 protocols. To use these tools, go to
GWN7610 WebGUI->System Settings->Debug and click on Ping/Traceroot.

Next to Tool choose from the dropdown menu: - IPv4 Ping for an IPv4 Ping test to Target

Type in the destination's IP address in Target field.

Figure 23: IP Ping

- IPv6 Ping for an IPv6 Ping test to Target
- IPv4 Traceroute for an IPv4 Traceroot to Target
- IPv6 Traceroute for an IPv6 Traceroot to Target
GWN7610 User Manual
P a g e | 33