Table 5: Device Configuration; Figure 21: Discovered Devices; Figure 22:Gwn7600 Online - Grandstream Networks GWN7600 User Manual

3. Click on Pair
GWN7600 acting as Master.
4. The paired GWN7600 will appear Online, users can click on
5. Users can click on
status, users connected to it and configuration. Refer to below table for Device Configuration tabs.
Status
Users
Configuration

Figure 21: Discovered Devices

under Actions, in order to pair the discovered access point as slave with the

Figure 22:GWN7600 online

next to Master or paired access point to check device configuration for its

Table 5: Device Configuration

Shows the device's status information such as Firmware version, IP
Address, Link Speed, Uptime, and Users count via different Radio
channels.
Shows the connected users to the GWN7600 access point.

Device Name: Set GWN7600's name to be shown next to MAC
address.

Fixed IP: Set a static IP for the GWN7600, default is unchecked.

Frequency: Set the GWN7600's frequency, it can be either
2.4GHz, 5GHz or Dual-band.

Enable Band Steering: When Frequency is set to Dual-Band,
users can check this option to enable Band Steering on the
GWN7600 User Manual
to unpair it.
P a g e | 27