Figure 18: Login Page
At factory reset, "Set unit as Master" will be checked by default, click on "Sign In" after typing the admin's
username and password.
Warning:
"Set unit as Master" option will forbid the GWN7600 Access Point from being paired by other Master
GWN76xx, and can only act as a Master Access point controller.
Users will need to perform a factory reset to the GWN7600, or unpair it from the initial GWN76xx in order
to make it open to Master Access Point mode again.
Login Page
After login, users can use the Setup Wizard tool to go through the configuration setup, or exit and configure
it manually. Setup Wizard can be accessed anytime by clicking on
while on the web interface.
Figure 19: Setup Wizard
P a g e
|
25
GWN7600 User Manual