2.
Click on Pair
GWN7610 acting as Master.
3. The paired GWN7610 will appear Online, users can click on
4. Users can click on
status, users connected to it and configuration. Refer to below table for Device Configuration tabs.
Status
Users
Configuration
Figure 15: Discover and Pair GWN7610
under Actions, in order to pair the discovered access point as slave with the
Figure 16:GWN7610 online
next to Master or paired access point to check device configuration for its
Table 6: Device Configuration
Shows the device's status information such as Firmware version, IP
Address, Link Speed, Uptime, and Users count via different Radio
channels.
Shows the connected Users to the GWN7610 access point.
Device Name: Set GWN7610's name to be shown next to MAC
address.
Fixed IP: Set a static IP for the GWN7610, default is unchecked.
GWN7610 User Manual
to unpair it.
P a g e
|
27