Bosch TES506 series Instruction Manual page 24

Reill beans!
although the bean container
(1) is full, or the grinding unit
does not grind the beans.
No hot water dispensed.
Too little or no milk froth
the milk frother
draw the milk in.
Coffee dispensing slows to a
trickle or stops completely.
Coffee has no "crema".
Coffee is too "acidic".
Coffee is too "bitter".
Error
Call hotline
You will ind the telephone numbers at the back of these instructions.
Beans are not falling into
the grinding unit
(beans too oily).
The milk frother
The milk frother
does not
Milk unsuitable for frothing. Use low-fat milk (1.5 % fat).
The milk frother
correctly assembled.
Build-up of limescale in the
appliance.
Coffee is ground too inely.
Pre-ground coffee is too
ine.
Build-up of limescale in the
appliance.
Unsuitable type of coffee.
The beans are no longer
fresh.
The grinding setting is not
suitable for the beans.
The grinding setting is too
coarse or the pre-ground
coffee is too coarse.
Unsuitable type of coffee.
The grinding setting is
too ine or the pr
c offee is too ine.
Unsuitable type of coffee.
The appliance has a fault.
Gently tap the bean container
(1).
Change the type of coffee if
necessary.
When the bean container (1)
empty, wipe it with a dry cloth.
is soiled. Clean the milk frother
see "Maintenance and
daily cleaning".
is soiled. Clean the milk frother
see "Maintenance and
daily cleaning".
is not Wet the milk frother parts and
press together irmly.
Descale the appliance as
described in the instructions.
Adjust the grinding unit to a
coarser setting. Use coarser
pre-ground coffee.
Descale the appliance as
described in the instructions.
Use a type of coffee with a
higher proportion of robusta
beans.
Use fresh beans.
Adjust grinding setting to ine.
Adjust the grinding unit to
a iner setting or use iner
p re-ground coffee.
Use a darker roast.
Adjust the grinding unit to a
coarser setting or use c oarser
ground coffee.
Change type of coffee used.
Please call the hotline.
,
,