Asus DSL-AC87CG User Manual page 8

Power LED
Off: No power.
On: Device is ready.
Flashing slow: Rescue mode
Flashing quick: WPS is processing.
DECT LED
Off: Cordless phone is not connected.
On: Cordless phone is connected.
5 GHz LED
Off: No 5GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
2.4 GHz LED
Off: No 2.4GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
FON2 / FON1 LED
Off: Analog phone or terminal device is not connected.
On: Analog phone or terminal device is connected.
WAN (Internet) LED
Red: No IP or no physical connection.
On: Has physical connection to a wide area network (WAN).
LAN 1~4 LED
Off: No power or no physical connection.
On: Has physical connection to an Ethernet network.
USB LED
Off: No power or no physical connection.
On: Has physical connection to USB devices.
Ethernet WAN LED
Off: Ethernet WAN is not connected.
On: Ethernet WAN is connected.
DSL LED
Off: No DSL link or unable to establish DSL link.
On: DSL link is established.
Flashing: DSL is attempting to connect to a DSLAM.
DECT button
Press this button for more than three (3) seconds to register a DECT phone.
Press this button for less than three (3) seconds to search for a DECT phone.
8