AEG AR 4030 BT/USB/CR Instruction Manual page 51

11 – 16 Button 6 , 5 , 4
+10 –10
Station Buttons (1 − 6)
a) Radio operation:
• Hold down the desired station preset button to
save a radio station.
• To choose a radio station, shortly press the respec-
tive station button.
• To select a program type
Button"
b) USB / CARD mode:
Direct selection of a music file.
Button"
Button 1
Press the button to interrupt the playback of a music
title (pause function). Press this button again to contin-
ue the playback.
Button 2
INT
Press the button. "INT ON" appears briefly on the
display. All tracks will be played in succession for
approx. 10 seconds. Press the button again to set the
normal playback speed.
Button 3
RPT
All music tracks are repeated by default. Press the
button to repeat the current track only. "RPT" will
appear on the display.
Button 4
RDM
Press the button. "RDM" will appear on the display.
A random playback of all tracks will start. Press the
button again to set the normal playback.
Button 5 6
–10 / +10
• Press the buttons to jump 10 tracks backward or
forward. It is required that over 10 tracks be availa-
ble on the storage medium.
• Press and hold the button briefly to select the
previous or the next folder. (If there are folders on
the storage medium)
17 – Button
a) In radio mode to choose a radio station.
b) In USB / CARD mode:
Press the button to choose the next music title.
18 – Button
a) In radio mode to choose a radio station.
b) In USB / CARD mode:
Press the button to choose the previous music title.
19 CLK – Button
Radio operation:
a) Show the display information (ID3 tag)
Press the button repeatedly to display the following
information successively on the display:
AR4030BT-USB-CR_IM
, 3 , 2 , 1
RDM RPT INT
Page 49 „PTY / MUTE
Page 50 „AMS
Time (will be set automatically for RDS reception),
frequency of the currently selected radio station,
current program type (PTY), radio station.
NOTE:
• If no corresponding information is available, NO
PTY is shown on the display.
• If the information on the display is too long it is
shown as scrolling text.
b) Set time manually
The time will be set automatically for RDS reception.
Should this not be the case, you may set the time
manually as follows:
1. Press and hold the
start flashing on the display.
2. Set hours using the
3. Press the CLK button again. The minute digits
start flashing.
4. Set minutes using the
5. Press the CLK button to confirm your settings.
The time is set.
Telephone operation:
Reject incoming call, end a conversation.
20 BAND – Button
a) Radio operation:
Shortly press the BAND button to switch between
the three FM (VHF) areas. The name of the corre-
sponding level is shown in the LCD display when the
frequency is indicated (see
b) Telephone operation:
Accept an incoming call, call the number dialed.
c) USB / CARD mode:
Press the button. The folder will be shown in the
display.
Phoning via Bluetooth
Bluetooth is a technology for wireless radio connection of
devices over short distances. Bluetooth technology enables
hands-free use of mobile phones. The driver can hold a
conversation via his mobile phone without having to hold it
to his ear.
This unit offers you the option of using a Bluetooth-enabled
mobile phone. The function radius is limited to around 3
metres depending on the device.
For optimum sound quality during a telephone call:
Do not set the volume too high. Doing so may lead to
feedback (whistling) from the speakers.
NOTE:
The speaker setting depends on the installation positions
of the speaker to the microphone and therefore cannot be
specified.
English
51
CLK button. The hour digits
/ buttons.
/ buttons.
CLK button).
05.07.16