1.2
Definition of Measurement Categories
CAT II: For measurements performed on circuits directly connected to
the electrical distribution system. Examples are measurements
on household appliances or portable tools.
CAT III: For measurements performed in the building installation at
the distribution level such as on hardwired equipment in fixed
installation and circuit breakers.
CAT IV: For measurements performed at the primary electrical supply
(<1000V) such as on primary overcurrent protection devices,
ripple control units, or meters.
1.3
Receiving Your Shipment
Upon receiving your shipment, make sure that the contents are consis-
tent with the packing list. Notify your distributor of any missing items. If
the equipment appears to be damaged, file a claim immediately with the
carrier and notify your distributor at once, giving a detailed description of
any damage. Save the damaged packing container to substantiate your
claim.
1.4
Ordering Information
Megohmmeter Model 1015.................................................. Cat. #1403.01
Includes a carrying case, shockproof rubber housing, set of black and red leads, black test
probe, red alligator clip, spare fuse (inside megohmmeter), four 1.5V alkaline "AA" batteries
(not installed), and a user manual.
1.4.1
Accessories and Replacement Parts
Set of replacement leads ..................................................... Cat. #2119.01
Carrying Case...................................................................... Cat. #2119.02
Fuses, set of 5, 1.6A ............................................................ Cat. #2970.22
Order Accessories and Replacement Parts Directly Online
Check our Storefront at www.aemc.com for availability
4
Megohmmeter Model 1015